2007 UTECO MISTRAL M – 1300 DUPLEX SOLVENT AND WATER BASE LAMINATOR
2007 UTECO MISTRAL M – 1300 DUPLEX SOLVENT AND WATER BASE LAMINATOR
Available quantity: 1
Description
Manufacturer: UTECO
Model: MISTRAL M – 1300
Type: DUPLEX SOLVENT AND WATER BASE LAMINATOR
Year: 2007
TECHNICAL DATAS:
Max web width: 1.350 mm
Max coat. width: 1.300 mm
Min web width: 700 mm
Max reels diam.: 1.000 mm unwinders
Max reels diam.: 1.000 mm rewinder
Cores diameter: Unwinders: 3” / 6” 76 / 152 mm
Rewinder: 3” / 6” 76 / 152 mm
Max reels weight: 1.000 kg
Max speed.: 500 m/min (mechanical speed)
Oven length: 6 m divided in 2 sections of 3 m
Heating system: By electric heaters
Cold seal: Machine is equipped with cold seal in register
Orientation: The coating group is on the right, seen from operator side
Power supply: .
· Tension: 400 V +/- 5 %; 50 Hz
· Phases: 3
· Nominal power electric heaters: 460 kW
· Nominal power machine: 105 kW
Compressed air:
· Pressure: 7 bar
· Conditions: clean, dry, filtered, oil-free
Included in supply:
· N. 10 transfer dosing rollers, sleeve type
· Ferrarini & Benelli corona treater on secondary unwinder
· Mono-component glue mixer
· Machine lighting system
MATERIALS:
COATING: Materials that can be coated:
- BOPP neutral and matallized: 12 / 80 μm
- PET: 8 / 40 μm
- PPP cast: 20 / 150 μm
- LDPE: 30 / 200 μm
- HDPE: 30 / 200 μm
- PVC rigid: 15 / 100 μm
- NYLON: 20 / 130 μm
- BOPA: 12 / 100 μm
- ALU: 9 / 50 μm
- PAPER and laminated materials: 20 / 200 g/m2
Lamination: .......... Materials that can be laminated:
- BOPP neutral and matallized: . 12 / 80 μm
- PET: 8 / 40 μm
- PPP cast: 20 / 150 μm
- LDPE: 20 / 200 μm
- HDPE: 15 / 200 μm
- PVC rigid: . 15 / 100 μm
- NYLON: 15 / 130 μm
- BOPA: 12 / 100 μm
- ALU: 7 / 50 μm
DESCRIPTION OF THE LINE
Duplex machine, compact size, with a coating width of 1.300 mm, and designed to use interchangeable coating trolleys: this solution allows to perform a wide range of coating and lamination.
The basic composition of the machine is the following:
· Primary unwinder, shaftless type with motor, for reels with 1.000 mm max
diameter
· Coating section, interchangeable trolley type, equipped with gravure coating
group and cold-seal in register
· 2 sections drying tunnel with a total length of 6 m, equipped with fans and electric
heaters
· Secondary unwinder, shaftless type with motor, for reels with 1.000 mm max
diameter
· Corona treater
· Lamination group with one chrome plated roller and one rubberized roller
· Rewinder, shaftless type with motor, for reels with 1.000 mm max diameter
Specifications
Manufacturer | UTECO |
Model | MISTRAL M – 1300 DUPLEX SOLVENT AND WATER BASE LAMINATOR |
Year | 2007 |
Condition | Used |